Filter
Top Products
75
75
Enabling smart zoom
Touch the map to make the map control switches appear, and then touch to enable Smart
Zoom.
Fine-tuning Smart Zoom
Touch the map to make the map control switches appear, and then touch and hold to open
the Smart Zoom settings window. Modify the zoom limits of Smart Zoom as necessary.
■ Driving track display
This unit can log the track that you drive. (See page 103)
A Track Log is a record of the change in GPS position and is independent of the route
calculated by this unit.
Track Logs can be recorded, renamed, swapped, shown on the map, exported to a memory
card in GPX format, and deleted. (See page 103)
You can instruct this unit to record native GPS data received from the GPS device,
independently of the normal Track Log. These logs are saved as separate text files on a
memory card, and they cannot be shown or replayed in this unit.
To turn on NMEA/SIRF log saving, touch the following switches: [Menu], [Settings], [Track
Logs], [Create NMEA/SIRF Log].
■ Using logs
This unit can record the track (change in GPS position) as you drive.
CHECK
There is no need to select a destination and create a route. Your path is recorded as you travel.
This feature is available in Advanced mode only.
The procedure is explained starting from the Map screen.