Eclipse - Fujitsu Ten AVN726E GPS Receiver User Manual


 
36
36
Main Unit Settings
Before Use
Operation of ESN security
When ESN security is in operation, the
navigation and audio functions of this
receiver become inoperable when it is
disconnected and subsequently reconnected
to the battery terminal of the vehicle.
For disc insertion, see “Loading/Unloading
a Disc” on page 22.
The security system is now [ON].
Touch to cancel the security setting
and return to the preceding screen.
ATTENTION
The registered music CD is required when
unlocking the security. It is recommended to
make a note of the registered music CD to
remind you of which music CD is registered.
Unlocking ESN security lock
When you disconnect and then reconnect the
battery terminal, the Program reading screen
and the Opening screen are displayed first,
followed by the Security screen.
For disc insertion, see “Loading/Unloading
a Disc” on page 22.
This receiver verifies the inserted CD
against the registered information, and
unlocks the security on completion of the
verification.
1
Go to the ESN setting screen, load a
music CD into the disc insertion slot.
2
Touch .
3
Touch .
Setup
YES
NO
1
Insert the registered music CD in the
disc insertion slot.
2
Touch .
YES