Filter
Top Products
62
62
Navigation Overview
Operation
■ Present location display
Access from the Navigation menu by touching [MAP].
For further information about the Map screen, see “Map screen” on page 78.
Navigation displays the route as follows.
Map Display
Symbol Name Description
Current GPS position Your present position displayed on the map.
Cursor (selected map position) The location selected in the Find menu, or a map
point selected by touching the map.
Start point The first point of the route.
Normally, if GPS position is available, it is used as the
start point of the route. If there is no valid GPS
position, Navigation uses the last known GPS
position as the start point.
When you are using a saved route, Navigation asks
you if you want to use your GPS position or the first
point in the saved route as the start point.
You can also modify the start point in the Cursor
menu. If you do so, automatic off-route recalculation
needs to be turned off to keep the selected point as
the start point.
If automatic off-route recalculation is disabled for any
of the above, touching the icon in the Turn
Preview field not only initiates route recalculation
from the current GPS position, but also re-enables
the automatic off-route recalculation.
Via point The via points are intermediate destinations. You can
place as many via points as you want.
Destination (end point) The last point of the route, the final destination.