Filter
Top Products
142
142
Using HD Radio
Audio Operations
You can save a radio station in memory in the
auto or manual mode.
■ Manual Saving
● The selected station will be saved, and the
preset channel number and frequency will
be shown on the display.
● To manually set additional selected
stations for the remaining preset channels,
repeat this procedure for each channel.
● Six stations can be memorized for each of
FM 1, 2 and 3, and six stations can be
memorized for AM, making a total of 24
stations.
● If the stations have been stored in
memory, a station can be selected and
received by the touching the appropriate
preset switch.
■ Automatic saving
IMPORTANT
● A search will be conducted from the lowest
frequency through progressively higher
frequencies, and stations with sufficiently
strong reception will be memorized for
preset registration numbers [1] to [6]. On
completion of the registration procedure, a
beep sounds once and the station
memorized last (i.e. the one memorized for
P6) will continue to be received.
Subsequently, when you listen to the radio
you will be able to select stations by calling
up preset numbers.
Saving Station in Memory
1
Select a station you wish to save by
Manual tuning or Auto tuning.
2
Touch and hold the preset switch for at
least 1 second.
● You can select a station by simply touching
a preset switch (any of [1] to [6]). The
frequency of the selected station is
displayed.
● When you save a new station in memory,
the existing station is cleared to make way
for it.
● If fewer than six stations can be received,
the left over switches retain their original
settings.
1
Touch for at least one
second.
Auto.P