Filter
Top Products
User's manual OnCourse Navigator 5
Configuring OnCourse Navigator - 121 -
8.1.10 Logbook
Logbook On the LOGBOOK screen, determine whether the logbook is to be
started automatically at the beginning of navigation (Yes) or not
(No).
Tap the Start automatically button to toggle between Yes and
No.
Independent from the settings made here, you may at any time
start or stop the logbook via the
/
icon.
8.1.11 Key configuration
Hardware keys On the KEYPAD screen, you may configure the hardware keys of
your Pocket PC to execute the "Up", "Down", "Left", "Right", "OK"
and "Return" actions. This enables convenient and easy
operation.
When you quit the navigation software, the keys will have their
standard functionality.
Tap the Key assignment button to check or to modify the
configuration.
8.1.12 Itinerary
This function is only available in "Extended mode".
For information on how to change the user mode, please refer to
"
Changing the user mode", page 38.
Proceeding
automatically to the
next route point…
On the I
TINERARY screen, determine whether you want to
navigate automatically to the next route point after having
reached a stopover (Yes) or not (No).
Tap the Proceed automatically to next destination button to
toggle between Yes and No.
If you do not proceed automatically, you may proceed as follows:
1. In navigation mode, tap short on any place on the map.
2. Select Next destination.