Filter
Top Products
User's manual OnCourse Navigator 5
Configuring OnCourse Navigator - 117 -
8.1.4 Signpost information
Signpost information On the SIGNPOST INFORMATION screen, you may effect the
following modifications:
The Show traffic signs command indicates whether signposts
indicating exits from Interstates or highways are currently being
displayed or not.
Tap the Show traffic signs command to toggle between On and
Off mode.
The new mode is now indicated on the button.
Note: This information can only be displayed when it is contained
in the cartographic material.
8.1.5 Speed limit
Speed control On the SPEED LIMIT screen, you may effect the following
modifications:
Setting Significance
Show traffic signs
This command indicates whether signposts
indicating speed limits are currently being
displayed or not.
Tap the Show traffic signs command and
select whether speed limits should be
displayed
Always
On speeding only or
Never.
Warning in urban
areas
This command indicates from how much
speeding on you want to be warned when
driving within built-up areas.
Tap the Warning in urban areas
command to select another value or to set
it to Never.
Warning outside
urban areas
This command indicates from how much
speeding on you want to be warned when
driving outside built-up areas.
Tap the Warning outside urban areas
command to select another value or to set
it to Never.
Note: This information can only be displayed when it is contained
in the cartographic material.
Caution: Information contained in the cartographic material can
be wrong, e.g. due to road works.
Traffic situation and road traffic regulations are absolutely prior
to the information given by the navigation system.