Filter
Top Products
35
© 2004 directed electronics, inc.
Bypass BlackJax temporarily
1. Turn ignition on.
2. Enter PIN code. Do not enter valet or programming mode.
3. Within 10 seconds press .
4. Siren chirps 1 time as confirmation of BlackJax bypassed.
5. Turn Ignition Off, siren chirps 3 times as confirmation of
exiting programming.
To return to normal BlackJax Operation
1. Turn ignition on.
2. Enter Pin code.
3. Within 10 seconds press .
4. Siren chirps 2 times as confirmation of BlackJax active.
5. Turn ignition off, siren chirps 3 times as confirmation of exit-
ing programming.
blackjax off warning indicator
Each time the ignition is turned off when BlackJax is bypassed the LED will
blink 10 times as warning that the BlackJax has been temporarily bypassed.
nnoottee::
If ignition remains on after entering PIN code and no action for 10
seconds, unit will automatically exit programming mode without chirps.
nnoottee::
If ignition remains on after entering PIN code and no action for 10
seconds, unit will automatically exit programming mode without chirps.