Filter
Top Products
15
© 2004 directed electronics, inc.
select siren sounds
To customize siren sounds, please refer to the selectable siren sounds fea-
ture in the User Selectable Features grid. Once in programming mode,
press on the remote to begin playback of the available sounds.
Press on the PlainView 2 Valet
®
button while playing the desired
sound to add that sound; press while playing the desired sound to
delete that sound.
diagnostics
The microprocessor at the heart of your security system is constantly
monitoring all of the switches and sensors that are connected to it. It
detects any faulty switches and sensors and prevents them from dis-
abling the entire system. The microprocessor will also record and report
any triggers that occurred during your absence.
arming diagnostics
If the system is armed while an input is active (door open, sensor trig-
gering, etc.) the unit will chirp twice when arming and then four more
times five seconds later. This is called Bypass Notification.
The security system will ignore the input that was active when the sys-
tem was armed, until the input goes away. Three seconds later the sys-
tem will monitor that input normally. For example, if your vehicle has