Filter
Top Products
© 2004 directed electronics, inc.
remote sensor disable
To temporarily disable a sensor input, arm the system, press
twice and then . The lights will flash four times and
all warn away trigger zones one, two, three, and eight are bypassed.
Press the buttons again; the lights flash four times and both warn away
and full trigger zones one, two, three, and eight are bypassed until the
system is disarmed. This can be performed anytime the system is
armed.
1. Arm the system.
2. Press twice and then .
3. The lights will flash four times; all warn away zones are now
bypassed.
4. Transmit the sensor bypass channel again.
5. The lights will flash four more times; the sensor warn away
and full trigger zones are now bypassed.
6. The sensor zones will reset when disarmed.
intellistart and smartwindows sensor bypass
When the system sees a command to start the vehicle via the
Intellistart, it bypasses sensor zones and will continue to bypass these
zones until the remote start shuts down.
When the system sees a SmartWindows command for up or down
operation, the unit will automatically bypass sensor zones one, two,
three, and eight until the windows complete their operation.