Filter
Top Products
31
© 2004 directed electronics, inc.
PIN Code Confirmation Procedure
Begin this procedure within 15 seconds of finishing the programming
sequence or the new code will not be set.
1. Turn on the ignition.
2. Enter the new PIN code.
3. Press and hold for three seconds.
z
LED turns on: New PIN code is learned and program-
ming is complete.
z
LED stays off: New PIN code is not learned and the sys-
tem reverts to the old PIN code. Redo the programming
sequence.
auto-immobilization feature
Auto-immobilization is a feature designed for maximum security; it
activates the UltraSecure Immobilization circuitry automatically.
auto-immobilization sequence
1. Turn ignition off or disarm alarm.
2. After 30 seconds the systems Immobilization circuits activate
and engage the starter and ignition interrupt.
3. LED blinks at ½ normal speed.