Filter
Top Products
12
© 2003 directed electronics, inc.
H1/3 WHITE/BLUE no function.
H1/4 BLACK/WHITE (-) 200 mA domelight-supervision output: Connect this wire to
the optional domelight supervision relay.
IIMMPPOORRTTAANNTT!!
This output is only intended to drive a relay. It cannot be connected
directly to the domelight circuit, as the output cannot support the current draw of one
or more bulbs.
H1/5 GREEN (-) door trigger input: Most vehicles use negative door trigger circuits.
Connect the green wire to a wire which shows ground when any door is opened. In
vehicles with factory delays on the domelight circuit, there is usually a wire that is
unaffected by the delay circuitry.
LIGHT BULB
PARKING LIGHT
RELAY OR SWITCH
(+) 12V
WHITE H1/2
(-) LIGHT FLASH OUTPUT