Filter
Top Products
16
©
1999 Directed Electronics, Inc.
Programming Options
Programming options control your system’s normal, operational set-
up. Most options do not require additional parts, but some may require
installation labor.
The system’s programming options are listed below. The factory de-
fault settings are in bold:
■ Active Arming (only with the transmitter) or Passive Arming (au-
tomatic arming 30 seconds after the last door is closed).
■ Arming and disarming confirmation siren chirps, on or off.
■ Ignition controlled door lock feature, on or off. With this fea-
ture on, the doors will lock three seconds after the ignition key
is turned on, and unlock when the ignition is turned off. The
system also prevents the doors from locking when the ignition
is turned on while any vehicle door is open.
■ Active Door Locking (only when arming with the transmitter)
or Passive Door Locking (with Passive Arming).
■ Valet Switch Pulse Count: The number of times the Valet switch
needs to be pressed to disarm the system. One to five pulses
can be programmed, with the default setting being one pulse.
■ Siren Tones and Chirp Volume: The output of the soft chirp siren
consists of six different tones in sequence. Your dealer can
eliminate any of these tones, resulting in a unique, easily iden-
tifiable siren sound. The chirps can be programmed for either
full volume or six decibels quieter than the full alarm blast.