Filter
Top Products
14
©
1999 Directed Electronics, Inc.
Code Hopping
®
The receiver and transmitter use mathematical formulas called algo-
rithms to change their codes each time the transmitter is used. This
Code Hopping technology has been developed to increase the secu-
rity of the unit. By following this set code sequence, the receiver and
transmitter stay synchronized, even if the remote transmitter is used
out of range of the vehicle. If, however, the transmitter is pressed many
times out of range of the vehicle, or the battery is removed, the trans-
mitter may get temporarily out of sync and fail to operate the system.
To resynchronize the remote transmitter, simply press several
times within range of the vehicle. The system will automatically re-
synchronize and the transmitter will respond normally.
Owner Recognition
Using a system programming device, your dealer can program specific
settings for each transmitter that is used with your system. The sys-
tem is then capable of recalling the individual settings assigned to
each transmitter. This Owner Recognition feature allows up to four
users of the same system to have four different settings that meet
their individual needs.
NOTE: Owner Recognition cannot be programmed without a system pro-
gramming device and the necessary software. Check with your dealer for
more information.