Directed Electronics 435 Automobile Alarm User Manual


 
10
©
1999 Directed Electronics, Inc.
NOTE: The Warn Away
®
Response to lighter impacts is bypassed if the sys-
tem is armed using the Silent Mode. This ensures that the siren does not
chirp in an environment where you don’t want chirps to be emitted. The
system is still capable of being triggered by heavier impacts; only the Warn
Away Response generated by light impacts is bypassed.
If you are threatened in or near your vehicle, pressing on your
remote transmitter for 1.5 seconds will trigger your alarm system
and attract attention. The siren will sound and the parking lights
will flash for 30 seconds. To stop the Panic Mode at any time, press
, , or .
Valet Mode prevents your system from arming and triggering ei-
ther automatically or with the transmitter. In Valet Mode, all
convenience functions (door locks, trunk release, etc.) will remain
operational. This feature is useful when washing or servicing
your vehicle.
To enter or exit Valet Mode with the Valet switch:
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the Valet switch
within 10 seconds.
The status LED will light steadily if you are entering Valet Mode
and will turn off if you are exiting Valet Mode.
DRW-35
Valet
®
Mode
Panic Mode