Filter
Top Products
13
©
1999 Directed Electronics, Inc.
Your system has a Tamper Alert feature that notifies you of triggers
that occur while you are away from your vehicle. If you hear four chirps
when you disarm, this indicates that the system was triggered in your
absence. If you hear five chirps when you disarm, this indicates that
a specific zone was triggered so many times that the Nuisance Pre-
vention Circuitry has bypassed that zone. In both cases, the pattern
of the flashing status LED will indicate which zone was triggered (see
Table of Zones). The system retains this information in its memory
and will continue to chirp four or five times each time the system
is disarmed, until the next time the ignition is turned on.
A zone is represented by the number of LED flashes used by the sys-
tem to identify a particular type of input. Standard input assignments
are listed below, along with spaces to write in any optional sensors
or switches that have been installed.
ZONE
(Number of DEALER-INSTALLED
LED Flashes) DESCRIPTION OPTIONS
1
Instant trigger—often used
for hood/trunk pinswitches
2 Instant trigger—a heavier impact
detected by the shock sensor
3 Door switch trigger
4 Instant trigger—for optional
sensors
5 Ignition trigger
Table of Zones
Disarming Diagnostics