Filter
Top Products
21
© 2005 directed electronics, all rights reserved
programming options
Programming options control what your system does during normal
operation, and require few or no additional parts. However, some may
require additional installation labor.
Following is a list of the program settings, with the factory settings in bold:
z
Autoarming on or autoarming off of the alarm : Automatic
arming 30-seconds after ignition turned off.
z
Arming/disarming confirmation siren chirps off, loud or
quiet. The siren arm/disarm chirps can be either full volume,
6 decibels quieter, or turned off completely.
z
Panic mode: on/off.
z
Siren duration: 30/60/90 seconds.
z
Set PIN code: Allows you to enter your own PIN code, over-
writing the factory PIN code.
z
Siren tones: The output of the siren consists of six different
tones in sequence. Any of these tones can be eliminated, result-
ing in a unique, easily identifiable siren sound.
z
NPC
®
: Nuisance Prevention
®
Circuitry on/off. Inhibits false
alarming if a protective zone repetitively alarms.
z
Remote Valet: on/off.
z
Reset settings to default (except for PIN code)
z
New remote learn features: Allows programming individual
transmitter channels to custom configurations. Refer to User
Selectable Features Descriptions - Column Three.
z
Clear all Remotes: Removes all remote controls from memory.