Filter
Top Products
9
© 2005 directed electronics, all rights reserved
8. Then once.
9. Then once. This enters the final digit 1.
auto-immobilisation
Immobiliser circuits automatically activate after 30-seconds.
Auto-immobilisation sequence:
1. Turn ignition off or disarm alarm.
2. After 30-seconds the systems Immobilisation circuits activate
and engage the starter and engine interrupts.
3. LED flashes at ½ normal speed.
Disarm the system when immobilised:
Use one of the following methods to turn off
auto-immobilisation.
z
Turn ignition on and press the button of the trans-
mitter.
z
Arm the alarm and then disarm the alarm.
z
Turn the ignition on and enter the system Valet/PIN code.
remote siren silencing
Remote siren silencing is a feature that makes it possible to silence and
reset the system when it is triggering without disarming the system. If
the system is triggered and the siren is sounding, press on the
remote to stop the trigger and return the unit to the armed state. The
system will not disarm, but rather reset. This prevents you from dis-
abling the system should you wish to silence it without visually check-
ing the vehicle. After resetting the system, press again to disarm
the system.