Filter
Top Products
11
© 2005 directed electronics, all rights reserved
remote sensor disable
This can be performed anytime the system is armed. Follow the proce-
dure listed below.
1. Arm the system.
2. Using the remote press and simultaneously.
3. The indicators will flash four times; all Warn Away
®
zones of
optionally installed sensors are now bypassed (zones two
and three).
4. Using the remote press and simultaneously
again.
5. The lights will flash four more times; All optional sensor
Warn away and Full trigger zones and the Tilt Sensor are
now bypassed
6. The sensor zones will reset when disarmed.
remote start sensor bypass
When the system sees a command to remote start the motorcycle, it
bypasses sensor zones and will continue to bypass these zones until the
remote start shuts down.
NNoottee::
Additional installation options required for Remote Start opera-
tion. See your Directed Authorised dealer for details.
nnoottee::
Sensor disable can be performed at any time after the alarm has
been armed.