Filter
Top Products
2
Harness and Adapter Cables
Wiring
Additional Documentation
Refer to the following documents for information on configuring and
using your DriveRight:
• The DriveRight 600
E User’s Guide included with your unit.
• The Online Help System in the DriveRight software.
• The DriveRight FMS User’s Manual located in an Adobe Acrobat
PDF file in your DriveRight program directory.
Tools and Materials Needed
DriveRight installation may require some or all of the following tools
and materials. Please review the installation instructions and make sure
you have all necessary tools before proceeding with the installation.
Note: Additional tools may be required depending on your specific installation.
All Installations
• Electric Drill with 7/64'' (2.5 mm) Drill Bit - Used to drill the tap
holes for #6 self-tapping screws.
• Medium Phillips Screwdriver
• Pliers
Digital Input
Adapter Cable
Harness Cable
Black Ground Wire (1)
(22AWG)
Red +12V Wire with
Fuseholder (2) (22 AWG)
Blue Wire with Fuseholder (2) (22 AWG)
Spade Terminal Sets
#8-10 Studs (2)
(3.5 - 5 mm)
1/4" Studs (2)
(6 mm)
Fuses (4)
(3AG 1-1/4 x 1/4",
.25A, Slo-Blo)
Insulated Male Disconnects (4)
(18-22AWG)
T-Tap Disconnects
Blue (1)
(14-16AWG)
Red (3)
(18-22AWG)
Butt Splices (8)
(26-22AWG or 24-20AWG)
In-Line Splice (5)