Filter
Top Products
TRANSMITTER PROGRAMMING
NOTE: All transmitters must be learned at the time of programming. This system can learn up to 4 remotes.
1. Turn key to the ON position and press program button 4 times.
2. After a short delay, the unit will flash the parking lights 4 times.
3. Press the Button #1 (Lock) on the remote you wish to program.
4. You should get 2 light flashes indicating the unit is waiting for the second code to learn. Press button #1
of a second transmitter, the unit will flash 3 times. Press the lock button on a 3
rd
or 4
th
transmitter for up
to 4 total. Note: The unit will not flash the lights when learning the 4
th
code. Turn key off to exit
programming mode.
IGN
OFF
WAIT FOR
4 FLASHES
PRESS 4X's
FLASH 2, 3, or 4 X's
IGN
OFF
PRESS LOCK BTN
LIGHTS
PANIC
9