Filter
Top Products
OPTION PROGRAMMING
1. Turn the Ignition ON and press the Override/Program button 5 times.
2. After a short delay, the parking lights will flash 5 times and status LED will be on solid.
3. Within the next few seconds, press the Override/Program button [again] the number of times that
corresponds to the options chart below. Parking lights and/or optional horn should chirp for each press.
4. When you get to the desired option number, quickly press the appropriate button on the remote control
according to the chart below. The system will provide 1 chirp/flash for Button 1 (Lock Symbol) and 2
chirps/flashes for button 2 and 3 for Button #3. (See Chart below for option descriptions and values.)
5. Turn Ignition off. System chirps and flashes the lights 3 times on exit. Change one option at a time
repeating these same steps 1-4. When you are finished customizing options, check operation.
PROGRAMMING OPTIONS CHART * = Default Setting
Option # Option Description BUTTON 1
LOCK
BUTTON 2
UNLOCK
BUTTON 3
TRUNK
1. Factory Horn Chirps / Pulses Pulse with
trip only
Arm/Disarm Chirps
& Pulse with trip
Arm/Disarm/Warn Chirp
& Pulse with trip *
2. Passive Arming /
Passive Chirp Countdown
ON OFF* Passive Arm with
Chirp Countdown
3. Passive Lock / Cust. Override ON OFF* Custom Override
4. Ignition controlled Locks ON* OFF Ignition Lock Only
5. 10/60 Sec. Door Open Warning 10 Seconds 60 Seconds*
6. Active Re-Arm (30 Sec.) ON* OFF
7. Double Unlock Pulse OFF* ON
8. Silent Arm/Disarm
(Chirp Defeat w/button 1 or 2)
OFF* ON
9. Parking Lights on with disarm ON* OFF
10. Disarm with trunk pop OFF ON*
11. N/A N/A N/A
12. Door Lock Pulse Time 0.7 Sec.* 3 Sec.
13. Type of Carjack Protection ACTIVE* PASSIVE FULL-TIME
14. Carjack Enable/Disable DISABLE* ENABLE
15. Arm/Disarm with IGN on
(Does NOT Override Full time
Carjack function)
DISABLED* ENABLE**
10