Filter
Top Products
Your 4-button/12-channel remote controls
The 4-button/12-channel remote control is an ultra-sophisticated miniature radio trans-
mitter powered by a tiny 12-volt battery. Range is up to 100 feet (up to 300 feet with the
optional ElectroLoop Antenna). Obstructions, electrical interference, weather conditions
or a weak battery will reduce range. Your 4-button/12-channel remote control is the key
to your IntelliGuard 800. It incorporates Clifford’s proprietary Anti-CodeGrabbing™
(ACG) technology with Random Code Generation for the ultimate in protection against
“code-grabbing” devices (see page 13). You will use your remote control to arm and
disarm the system, lock and unlock the doors, activate the panic feature, adjust sensor
sensitivity, activate the headlights, control Remote QuickAccess features or command
options such as a remote trunk release, remote memory seat adjustment and even remote
starting of the engine and heater or air conditioner, among other available options.
How to use your keychain
remote control
Your remote control can
individually command up to
12 different system functions
and options. It’s like having
a TV with 12 channels. You
change channels (functions)
with your keychain remote
control. But instead of
putting 12 buttons on the
remote control, we made it
easy: First, the button you
use the most — button 1 to arm, disarm, lock and unlock the doors — is larger than the
others. Buttons 2, 3 and 4 are the smaller buttons to the right, below and left of button 1.
The LevelShift button on the side lets you select channels 5–12:
To transmit either channel 1, 2, 3 or 4: Just press either button 1, 2, 3 or 4. For instance,
to transmit channel 3, press button 3. While you transmit, the LED indicator will
blink once every second: this indicates level 1.
To transmit either channel 5, 6, 7 or 8: Press the LevelShift button once. This shifts
buttons 1–4 to level 2 (channels 5–8). Then press the desired button within the
next 7 seconds. For instance, to transmit channel 5, press the LevelShift button
once, then press button 1. While you transmit, you’ll notice that the LED indicator
blinks twice, pauses, blinks twice, etc.: this indicates level 2.
To transmit channel 9, 10, 11 or 12: Press the LevelShift button twice. This shifts
buttons 1–4 to level 3 (channels 9–12). Then press the corresponding button within
the next 7 seconds. For instance, to transmit channel 10, press the LevelShift button
twice, then press button 2. While you transmit, you’ll notice that the LED blinks
three times, pauses, blinks three times, etc.: this indicates level 3.
NOTE: One second after you stop transmitting level 2 or level 3 (channels 5–12),
the remote control automatically returns to level 1 (channels 1–4).
8