Filter
Top Products
Page 2 - MS2007 Owner’s Manual
Remote Transmitter Layout
The Ungo MS2007 comes with a multi-function LCD Remote Transmitter featuring two-way
communication with the vehicle. Each time a transmitter button is pressed, the LED will flash and
the transmitter will beep to indicate that a transmission is taking place. If the transmitter is within
two-way communication range, the LCD will display the status of the system. The transmitter is
also equipped with a built-in chime that will play a tune as confirmation of some features such as
remote starting, clock setting, etc.
Button 1 Arms and Disarms the system. This button also activates the system’s Panic feature.
Button 2 Activates the system’s Auxiliary Function, commonly used for trunk release.*
Button 3 Activates the system’s Remote Start Feature.
Button 4 Confirms the system’s status. This button also activates the LCD backlight for night
time use.
LCD Display
The MS2007 Remote Transmitter is equipped with an LCD panel that displays the system’s
status information. If the transmitter is within range of the vehicle and a button is pressed, or the
vehicle is tampered with, the LCD display will show what action is taking place. The LCD display
is backlit for easy viewing at night and will illuminate wihen Button 4 is pressed, or when
confirmation of any action is received by the transmitter.
Setting the Clock
The remote transmitter has a built-in clock that displays the current time.
To set the clock:
1. Press transmitter Button 2 and Button 3 simultaneously for two seconds.
• The LCD will show .
Remote Transmitters
IV
I
II III
Button 2
LED
Button 4
Button 1
Button 3
MS2007.qxd 09/24/2002 1:24 PM Page 2