Filter
Top Products
Auxiliary Function
This function will operate regardless of whether the system is armed or disarmed. To operate the
auxiliary function, press Button 3.
• The LCD will show .
Remote Sensor Bypass
The system can be set up so that in case of extreme weather conditions (such as high winds),
the shock sensor can be temporarily bypassed using the Remote Transmitter, while the system
is armed, to prevent false alarming.
To Bypass the sensors:
1. After arming the system, press Button 2 on the Remote Transmitter within 2 seconds.
• The siren will chirp 5 times, indicating the sensors have been bypassed.
2. The sensors will remain bypassed until the next time the system is armed.
MS2007 Owner’s Manual - Page 13
MS2007.qxd 09/24/2002 1:24 PM Page 13