Filter
Top Products
Common Operations
• Selecting microphone
input
1.
Select "MIC".
2.
Turn the
[~/II·
ENT]
knob to select one of
the following:
-INTERNAL:
Built-in microphone will be used.
-
EXTERNAL:
An external microphone will be
used.
Note:
- The factory default setting
is
"INTERNAL".
System Menu
1. Press and hold
[~]
and [
.....
] buttons si-
multaneously for
1
.5
seconds
or
longer.
2. Press the [
.....
,
~
] button
to
select
an
item.
["VERSION"
e "FACT. RST" J
3.
Press the
[~]
button to exit the menu.
• Checking
the
unit
version
2-1. Select "VERSION".
• Restoring
to
factory default setting
This function allows user to restore the unit to the
factory default setting.
2-1. Select "FACT. RST".
2-2. Push the
[~/II
•
ENT]
knob. A reset con-
firmation is prompted.
2-3.
Turnthe[~/II·
ENT]
knob to select "YES"
or
"NO".
2-4. Push the
[~/II
•
ENT]
knob to confirm the
selection.
Notes:
-
All
pairing information
and
preset memories will
be
cleared. User will have
to
manually perform those
setting again.
- Once reset, system will automatically turn off
and
re-power
on.
- Clock time will not
be
reset with this operation.
The clock time reset is done with the following
steps.
1. Turn off the power.
2.
Press the [RELEASE] button and remove the
DCP.
3. Press the reset button with a thin rod.
~Reset
button
)
28 FB275BT I FB275BTB
Common Operations
• Selecting microphone
input
1.
Select "MIC".
2.
Turn the
[~/II·
ENT]
knob to select one of
the following:
-INTERNAL:
Built-in microphone will be used.
-
EXTERNAL:
An external microphone will be
used.
Note:
- The factory default setting
is
"INTERNAL".
System Menu
1. Press and hold
[~]
and [
.....
] buttons si-
multaneously for
1
.5
seconds
or
longer.
2. Press the [
.....
,
~
] button
to
select
an
item.
["VERSION"
e "FACT. RST" J
3.
Press the
[~]
button to exit the menu.
• Checking
the
unit
version
2-1. Select "VERSION".
• Restoring
to
factory default setting
This function allows user to restore the unit to the
factory default setting.
2-1. Select "FACT. RST".
2-2. Push the
[~/II
•
ENT]
knob. A reset con-
firmation is prompted.
2-3.
Turnthe[~/II·
ENT]
knob to select "YES"
or
"NO".
2-4. Push the
[~/II
•
ENT]
knob to confirm the
selection.
Notes:
-
All
pairing information
and
preset memories will
be
cleared. User will have
to
manually perform those
setting again.
- Once reset, system will automatically turn off
and
re-power
on.
- Clock time will not
be
reset with this operation.
The clock time reset is done with the following
steps.
1. Turn off the power.
2.
Press the [RELEASE] button and remove the
DCP.
3. Press the reset button with a thin rod.
~Reset
button
)
28 FB275BT I FB275BTB