Filter
Top Products
Basic Operations
Adjusting the volume
Turning the [
~/II
•
ENT
] knob clockwise in-
creases the volume; turning it counterclockwise
decreases the volume.
"VOLUME 0" to "VOLUME 33" will be displayed
depends on the volume level.
* Factory default setting for volume is "VOLUME
13",
AUX function
This system has AUX RCA input in the rear panel
where you can listen to sounds and music from
external devices connected to this unit.
1.
Connect the external music player to the AUX
RCA input.
2. Enable the AUX function in Adjustment mode.
Please refer
"Setting
AUX
function"
on page
25 for more details.
3. Press the [SRC] button to select the AUX mode
to activate the AUX function.
Note:
• Volume can
be
adjusted through the unit.
Please refer chapter
"Common
Operations"
on
page
24
for more operation controls.
Radio Operations
Listening to the radio
1.
Press the [SRC] button and select the Radio
mode, then the radio will be on.
2.
To
select a preset band, press the [BND] but-
ton, then select one
of
the preset bands such
as FM1, FM2 or FM3. Every time the [BND]
button is pressed, the display will change as:
FM1
-7 FM2 -7 FM3 -7 FM1...
3. Press the [
.....
,
~]
button
to
tune
in
the
desired station.
* Initial frequency display
is
"87.50MHz".
Seek tuning
There are 2 types of seek tuning: OX
SEEK
and
LOCAL SEEK.
OX
SEEK can automatically tune in to receivable
broadcast stations; LOCAL
SEEK
can tune in to
only broadcast stations with a good reception
sensitivity.
1.
Press the [BND] button and select the desired
FM band.
* Press
and
hold
the [BNO] button for 1.5 seconds
or longer to switch to Auto Seek mode. Make
sure "SEEK TUNE"
is
displayed briefly.
2. Press the [
.....
,~]
button to start automatic
station tuning.
When the
[~]
button is pressed,
search
will be performing in the direction
of
higher fre-
quencies. When the [
.....
] button is pressed,
search will be performed in the direction of
lower frequencies.
• OX SEEK
When the
[~]
button is pressed, search will be
performing in the direction
of
higher frequencies.
When the [
.....
] button is pressed, search will be
performed in the direction of lower frequencies.
* When seek tuning starts, "OX" appears in the
display.
• LOCAL SEEK
If the button is pressed and held in position for
1.5 seconds or longer, local seek tuning will be
enabled. Broadcast stations with good reception
sensitivity are selected.
* When local seeking starts, "LO" appears in the
display.
10 FB275BT I FB275BTB
Basic Operations
Adjusting the volume
Turning the [
~/II
•
ENT
] knob clockwise in-
creases the volume; turning it counterclockwise
decreases the volume.
"VOLUME 0" to "VOLUME 33" will be displayed
depends on the volume level.
* Factory default setting for volume is "VOLUME
13",
AUX function
This system has AUX RCA input in the rear panel
where you can listen to sounds and music from
external devices connected to this unit.
1.
Connect the external music player to the AUX
RCA input.
2. Enable the AUX function in Adjustment mode.
Please refer
"Setting
AUX
function"
on page
25 for more details.
3. Press the [SRC] button to select the AUX mode
to activate the AUX function.
Note:
• Volume can
be
adjusted through the unit.
Please refer chapter
"Common
Operations"
on
page
24
for more operation controls.
Radio Operations
Listening to the radio
1.
Press the [SRC] button and select the Radio
mode, then the radio will be on.
2.
To
select a preset band, press the [BND] but-
ton, then select one
of
the preset bands such
as FM1, FM2 or FM3. Every time the [BND]
button is pressed, the display will change as:
FM1
-7 FM2 -7 FM3 -7 FM1...
3. Press the [
.....
,
~]
button
to
tune
in
the
desired station.
* Initial frequency display
is
"87.50MHz".
Seek tuning
There are 2 types of seek tuning: OX
SEEK
and
LOCAL SEEK.
OX
SEEK can automatically tune in to receivable
broadcast stations; LOCAL
SEEK
can tune in to
only broadcast stations with a good reception
sensitivity.
1.
Press the [BND] button and select the desired
FM band.
* Press
and
hold
the [BNO] button for 1.5 seconds
or longer to switch to Auto Seek mode. Make
sure "SEEK TUNE"
is
displayed briefly.
2. Press the [
.....
,~]
button to start automatic
station tuning.
When the
[~]
button is pressed,
search
will be performing in the direction
of
higher fre-
quencies. When the [
.....
] button is pressed,
search will be performed in the direction of
lower frequencies.
• OX SEEK
When the
[~]
button is pressed, search will be
performing in the direction
of
higher frequencies.
When the [
.....
] button is pressed, search will be
performed in the direction of lower frequencies.
* When seek tuning starts, "OX" appears in the
display.
• LOCAL SEEK
If the button is pressed and held in position for
1.5 seconds or longer, local seek tuning will be
enabled. Broadcast stations with good reception
sensitivity are selected.
* When local seeking starts, "LO" appears in the
display.
10 FB275BT I FB275BTB