Filter
Top Products
• Call via
voice
dialing
2-1. Select "VOICEDIAL"
3-1.
Press
the
[ r ]
button
again
to
activate
voice dialing.
3-2. Speak the contact name clearly towards the
internal/external microphone to perform voice
dialing.
• Ending a call
This function allows you to end a call conversa-
tion directly from the car stereo.
1.
Press the [
~
] button to end the call.
2.
The display returns to previous mode.
Note:
• "CALL END" will
be
displayed when ending a
conversation.
Alternatively, you may also answer/reject/end the
call by using your phone's keypad. However, it
is recommended to always perform those opera-
tions from the main unit.
Making a call
There are few ways to make outgoing call.
If no phone is connected, the car stereo will not
be able to make an outgoing call. The car stereo
will try to reconnect to the last connected device if
Auto Connection is enabled
in
Adjustment mode.
This is dependent on mobile phones.
Please make sure your phone is connected with
the"
0" indicator light is on.
There are 2 display icons at the top row of dis-
play when entering Telephone mode.
Ir." :Call can be activated.
• : Call cannot be activated. Please connect
your phone.
1.
Press the
[r]
button to enter Telephone
mode.
2.
Press the [
.....
,
~]
to select the following
"VOICEDIAL"
~
"LN REDIAL"
~
"MEMORY 1"
~
"MEMORY 2"
~
"MEMORY 3"
~"MEMORY
4"
~
"MEMORY 5"
~
"MEMORY 6"
3.
Press the [
r]
button again to perform outgo-
ing call.
Note:
• "Dialing"
will
be
displayed when making a call.
Telephone numbers will
be
displayed if using the
preset telephone numbers dialing.
21
FB275BT/FB275BTB
•
Answering
a call
User can answer an incoming call directly from
the car stereo.
1.
Press the [
r]
button to pick up an incoming
call.
2.
The display switch to Telephone Interrupt mode.
Notes:
• During conversation,
",,".'11"
and
call time elapsed
will
be
displayed.
• During
an
incoming call, some phones
may
auto-
matically pick
up
the call when
it
connects
to
this
unit.
• Rejecting a call
This function allows you to reject an incoming
call directly from the car stereo.
1.
Press the [
~]
button to reject an incoming
call.
2.
The display returns to previous mode.
Handsfree Operations
Incoming call
Whenever your car stereo is operating, the car
stereo is
in
standby mode awaiting the next call,
when an incoming call arrives the car stereo will
mute automatically and the ring tone is repro-
duced through your car's speaker.
The Car stereo will temporarily switch to Tele-
phone Interrupt mode and caller
ID
will be dis-
played
in
the car stereo.
Notes:
• Car stereo will
be
automatically set
as
default
speaker output everytime when there
is
an
incom-
ing
call.
• Some phones choose to present the audio despite
being told to route it to the car stereo. This duplica-
tion of audio
is
a device problem/feature but does
not impair functionality.
• During incoming call, caller
ID
and
"Calling..." will
be
displayed. Caller
ID
and CLIP (Calling Line
Identification Presentation)
is
dependent
on
mobile
phone
and
service provider.
However,
incoming call
with
private telephone numbers (CLlR- Calling
Line
Identification Restriction) will not
be
displayed.
• Deleting a
digit
1.
During Telephone Numbers Edit mode, turn the
[./11·
ENT]
knob to select a blank digit.
2.
Push the [
./11
.
ENT]
knob to delete cur-
rent digit.
Note:
• Digits
on
the right side (if there
is
any)
will
be
shifted
to
the left.
• Call via
voice
dialing
2-1. Select "VOICEDIAL"
3-1.
Press
the
[ r ]
button
again
to
activate
voice dialing.
3-2. Speak the contact name clearly towards the
internal/external microphone to perform voice
dialing.
• Ending a call
This function allows you to end a call conversa-
tion directly from the car stereo.
1.
Press the [
~
] button to end the call.
2.
The display returns to previous mode.
Note:
• "CALL END" will
be
displayed when ending a
conversation.
Alternatively, you may also answer/reject/end the
call by using your phone's keypad. However, it
is recommended to always perform those opera-
tions from the main unit.
Making a call
There are few ways to make outgoing call.
If no phone is connected, the car stereo will not
be able to make an outgoing call. The car stereo
will try to reconnect to the last connected device if
Auto Connection is enabled
in
Adjustment mode.
This is dependent on mobile phones.
Please make sure your phone is connected with
the"
0" indicator light is on.
There are 2 display icons at the top row of dis-
play when entering Telephone mode.
Ir." :Call can be activated.
• : Call cannot be activated. Please connect
your phone.
1.
Press the
[r]
button to enter Telephone
mode.
2.
Press the [
.....
,
~]
to select the following
"VOICEDIAL"
~
"LN REDIAL"
~
"MEMORY 1"
~
"MEMORY 2"
~
"MEMORY 3"
~"MEMORY
4"
~
"MEMORY 5"
~
"MEMORY 6"
3.
Press the [
r]
button again to perform outgo-
ing call.
Note:
• "Dialing"
will
be
displayed when making a call.
Telephone numbers will
be
displayed if using the
preset telephone numbers dialing.
21
FB275BT/FB275BTB
•
Answering
a call
User can answer an incoming call directly from
the car stereo.
1.
Press the [
r]
button to pick up an incoming
call.
2.
The display switch to Telephone Interrupt mode.
Notes:
• During conversation,
",,".'11"
and
call time elapsed
will
be
displayed.
• During
an
incoming call, some phones
may
auto-
matically pick
up
the call when
it
connects
to
this
unit.
• Rejecting a call
This function allows you to reject an incoming
call directly from the car stereo.
1.
Press the [
~]
button to reject an incoming
call.
2.
The display returns to previous mode.
Handsfree Operations
Incoming call
Whenever your car stereo is operating, the car
stereo is
in
standby mode awaiting the next call,
when an incoming call arrives the car stereo will
mute automatically and the ring tone is repro-
duced through your car's speaker.
The Car stereo will temporarily switch to Tele-
phone Interrupt mode and caller
ID
will be dis-
played
in
the car stereo.
Notes:
• Car stereo will
be
automatically set
as
default
speaker output everytime when there
is
an
incom-
ing
call.
• Some phones choose to present the audio despite
being told to route it to the car stereo. This duplica-
tion of audio
is
a device problem/feature but does
not impair functionality.
• During incoming call, caller
ID
and
"Calling..." will
be
displayed. Caller
ID
and CLIP (Calling Line
Identification Presentation)
is
dependent
on
mobile
phone
and
service provider.
However,
incoming call
with
private telephone numbers (CLlR- Calling
Line
Identification Restriction) will not
be
displayed.
• Deleting a
digit
1.
During Telephone Numbers Edit mode, turn the
[./11·
ENT]
knob to select a blank digit.
2.
Push the [
./11
.
ENT]
knob to delete cur-
rent digit.
Note:
• Digits
on
the right side (if there
is
any)
will
be
shifted
to
the left.