Filter
Top Products
Clamp
Installation
1. Position three outer clamps (A), on each side rail.
The positions on the siderails are marked CLAMP.
2. Position the grooves of
the clamps on the side
rails (A) using the
center groove (B).
3. If the pickup box
has molded bed rail
protectors (A), remove
the insert (C) from the
outer groove on the
clamp, and position
the clamp on the side
rail (B) using the outer
groove (D).
4. Slide the inner
clamp (B) into the
outer clamp (A).
5. Turn the latch (C) onto
the outer clamp.
3-8