Chevrolet 2010 Cobalt Coupe Automobile User Manual


 
How to Inspect the Engine Air
Cleaner/Filter
{
WARNING:
Operating the engine with the air cleaner/filter off
can cause you or others to be burned. The air
cleaner not only cleans the air; it helps to stop
flames if the engine backfires. Use caution when
working on the engine and do not drive with the
air cleaner/filter off.
Notice: If the air cleaner/filter is off, dirt can easily
get into the engine, which could damage it. Always
have the air cleaner/filter in place when you are
driving.
To inspect the air cleaner/filter remove the filter from the
vehicle and lightly shake the filter to release loose dust
and dirt. If the filter remains caked with dirt, a new filter
is required. Never use compressed air to clean the filter.
To inspect or replace the engine air cleaner/filter,
1. Turn off the engine.
2. Disconnect the air flow sensor electrical connector.
3. Loosen the screws on the clamps holding the air
outlet duct in place. Do not remove the clamps.
4. Remove the air outlet duct.
5. To remove the filter cover, unlatch the clamps, then
pull up on the front and pull out.
6-24