Filter
Top Products
Ending Cruise Control
There are two ways to end cruise control:
.
Step lightly on the brake pedal or the clutch pedal
if the vehicle has a manual transmission. This will
only end the current cruise control session.
.
Press J to turn the system completely off.
Erasing Speed Memory
The cruise control set speed memory is erased when
the cruise control or the ignition is turned off.
Headlamps
The lever on the left side of the steering column
operates the exterior lamps.
The exterior lamp switch has the following
four positions:
2 (Headlamps): Turns on the headlamps, parking
lamps, and taillamps.
; (Parking Lamps): Turns on the parking lamps and
taillamps only.
AUTO (Automatic Headlamp System): Automatically
turns on the Daytime Running Lamps (DRL) during
daytime, and the headlamps, parking lamps, and
taillamps at night. This position must be selected
in order for the Wiper Activated Headlamps to be
activated. See Wiper Activated Headlamps
on
page 4‑10
.
P (Off/On): When operating in AUTO, a momentary
turn of the switch to Off/On will turn the Automatic
Headlamp System off or back on. For vehicles first
sold in Canada, the automatic transmission must be in
P (Park) or the manual transmission must have the park
brake set, before the Automatic Headlamp System can
be turned off.
4-9