Restoring Power
The auxiliary lamp switch
is located on the
overhead console.
This switch includes wiring provisions for a dealer/
retailer or a qualified service center to install an
auxiliary roof lamp. When the wiring is connected to an
auxiliary roof mounted lamp, pressing the bottom of the
switch will activate the lamp and illuminate an indicator
light at the bottom of the switch. Pressing the top of the
switch again will turn off the roof mounted lamp and
indicator.
1. Be sure that the auxiliary lamp switch is off.
2. Vacate the vehicle and reconnect the battery cable.
3. Turn the auxiliary lamp switch on. The accessory
should now be working. If it is not working, check
the connections.
4. After ensuring that the accessory is working
properly, install the grommet in the hole. Seal with
silicone sealer to prevent water leakage.
Notice: Overloading the vehicle's electrical system
may damage your vehicle's accessories. Do not
overload the vehicle's system by having
unnecessary accessories on at the same time.
15-15