Filter
Top Products
K(Unlock): Press this button to unlock the driver’s
door. The light on the door will flash two times. Press the
button two times within 10 seconds to unlock both
doors. If it is dark enough outside, your interior lamps
will come on.
Your memory settings may also be recalled when you
press the unlock button on the keyless access
transmitter. See Memory Seat, Mirrors and Steering
Wheel on page 1-4 for more information.
}(Hatch/Trunk): Press and hold this button for
about one second to open the hatch/trunk lid while the
engine is turned off. If the engine is running the shift
lever needs to be in PARK (P) for an automatic
transmission or NEUTRAL with the parking brake set for
a manual transmission. See Parking Brake on
page 2-34.
L(Panic): Press this button to sound the vehicle
alarm. Press any other button on the keyless access
transmitter to stop the vehicle alarm.
Matching Transmitter(s) to Your
Vehicle
Each keyless access transmitter is coded to allow
only transmitters programmed to your vehicle, to work.
If a transmitter is lost or stolen, a replacement can be
purchased and programmed through your dealer/retailer.
Your dealer/retailer can reprogram your vehicle so lost
or stolen transmitters no longer work with your vehicle.
Each vehicle can have a maximum of four transmitters
matched to it.
To match a new transmitter to your vehicle when you
have a recognized transmitter (two recognized
transmitters are required for Canadian owners):
1. The vehicle must be off.
2. Have the recognized and new, unrecognized
transmitters on your person.
3. Go to the rear of the vehicle and insert the vehicle
key into the key cylinder located above the license
plate. See Hatch on page 2-14 for more information
on the key cylinder.
4. Open the trunk.
5. Turn the key five times within five seconds.
6. The DIC will display READY FOR FOB #X, where
X can be 2, 3 or 4.
2-6