Filter
Top Products
TORQUE SPECIFICATIONS
Application Ft. Lbs. (N.m)
Adjuster Plug Lock Nut
Magnasteer ............................................... 50 (68)
Quiet Valve .............................................. 55 (75)
Crossmember Bolts
"J" & "Y" Bodies ........................................ 81 (110)
Engine Frame-To-Body Bolts
"C", "E", "H", & "K" Bodies ...................... (2) 141 (191)
"W" Body ......................................... (1) 133 (180)
Engine Mount Bolt ("F" Body) ............................... 37 (50)
Inner Tie Rod-To-Rack ................................. (2) 74 (100)
Pinion & Valve Assembly Lock Nut ........................... 26 (35)
Pressure Line Fitting (Hydraulic Union) .................... 20 (27)
Pump Mounting Bolts
"C" & "H" Bodies ......................................... 20 (27)
"E" Body ................................................. 35 (47)
"F" Body ................................................. 23 (31)
"G", "N" & "W" Bodies .................................... 25 (34)
"H" Body ................................................. 20 (27)
"J" Body
2.2 L .................................................. 22 (30)
2.4 L .................................................. 19 (26)
"K" Body
2000 ................................................... 24 (33)
2001 ................................................... 37 (50)
"Y" Body ............................................... 18 (25)
Rack & Pinion Mounting Bolt/Nuts
"C" Body ............................................. (2) 48 (65)
"E" Body ............................................. (2) 50 (68)
"F" Body ............................................. (2) 63 (85)
"G", "H" & "K" Bodies ................................ (2) 70 (95)
"J" Body ............................................ (2) 89 (120)
"N" Body ............................................ (2) 81 (110)
"W" Body ............................................. (2) 59 (80)
"Y" Body ............................................ (2) 74 (100)
Steering Shaft Lower Coupling Pinch Bolt
All Others ............................................... 35 (47)
"H" & "K" Bodies ......................................... 33 (45)
"J" Body ................................................. 30 (40)
"N" Body ................................................. 15 (20)
Tie Rod Adjusting Hex Lock Nut
All Others ............................................... 50 (68)
"C", "G", & "J" Bodies ................................... 55 (75)
"Y" Body ................................................. 44 (60)
Tie Rod End Castle Nut ................................. (3) (4) (5)
Transmission Mounting Nut ("F" Body) ....................... 37 (50)
Wheel Lug Nuts ........................................... 100 (136)
(1) - Install NEW bolts whenever bolts are loosened or removed.
(2) - Apply Loctite (GM 1052624) to bolt threads. Tighten bolts
in sequence. See Fig. 3.
(3) - To align cotter pin holes, tighten nut a minimum of 35
ft. lbs. (47 N.m) and a maximum of 52 ft. lbs. (71 N.m). DO NOT
back off nut to align cotter pin holes.
(4) - On "W" body, tighten to 22 ft. lbs. (30 N.m), then an
additional 115 degrees.
(5) - On "N" body, tighten to 15 ft. lbs. (20 N.m), then an
additional 180 degrees.