Filter
Top Products
SYSTEM COMPONENTS
TECHNICAL ASSISTANCE
BEFORE YOU BEGIN
2
Should you need help. First check our website at www.bulldogsecurity.com or call our toll-free Tech Support
Hotline Monday through Friday 9AM-8PM and Saturday 10AM-4PM EST at 800-878-8007.
You must give the following information:
•Name
•Telephone Number with Area Code (Fax number if applicable)
•Year, Make, and Model of the vehicle
•The model you are installing
•The type of assistance you are requesting
If you give the above information you will be called back as soon as possible.
Please do not skip any steps.
On-Board Parking Light Relay Built in relay provides a positive (+) parking light output. No external relay needed.
On-Board Dual Stage Shock Sensor Saves time in installation. Not sensitive to temperature or aging, but extremely sensitive to
shock or glass breakage.
Ignition Detection Adds protection by sounding the siren and flashing the lights if the ignition wire is hot-
wired or turned on when the system is armed, even if the current sensor or door switch wires
have been cut.
Computer Controlled Fan No additional wiring needed. This model distinguishes between an electric fan turning on and
Sensor Override a light bulb.
Code Learning Allows your alarm to learn new remotes, should you want to add remotes, or if remotes are lost.
E Squares Memory Back Up The system memorizes its programmed features if power is lost.
Limited Lifetime Warranty Guarantees life-long protection.
1- Installation and Operation Guide
1- Main Control Module
2- Four Button Remote Transmitters
1- 126db Six Tone Siren
1- 16-Pin Wire Harness
1- 5-Pin Door Lock Harness
1- Starter Interrupt Relay and Prewired Socket
Congratulations, you have purchased one of the most advanced alarm systems ever made. Your new alarm is
a technological breakthrough utilizing the most advanced, state-of-the-art technology and components. It
is computer controlled and manufactured in the U.S.A. The dependability and variety of features make Bulldog
Security the leader in the industry. Enjoy your new alarm for years to come!
Since there are many different makes and models of vehicles, look at our website, www.bulldogsecurity.com.
Read this manual thoroughly BEFORE starting the installation. Please do not skip any steps. Mount the
control module under the driver’s dash inside the vehicle after all connections have been made. Do not
mount the control module in the engine compartment.
PRE-INSTALLATION DISCUSSION
It is always good policy to discuss the following topics with your customer. Use masking tape or post-it
notes to indicate the preferred mounting locations of interior components.
CHECK WITH YOUR CUSTOMER
•LED position, visible from as many of the vehicle's windows as possible for its deterrent value.
•Which option(s) the customer wants programmed.
•Choose Anti-carjacking and override switch locations for convenient customer use.
1- Momentary Switch
1- Anti-carjacking Switch
1- LED Status Indicator and Bracket
1- Extended Range Antenna and Antenna Clip
1- Warranty
2- Bulldog Window Decals