Filter
Top Products
Headlamp
Bulb
Replacement
For the type
of
bulb, see the Index under “Replacement
Bulbs.”
1.
Turn
the bulb assembly counterclockwise
1/6
turn,
pressing in firmly,
until
the flanges align with the
slots
in
the
retainer ring.
2.
Pull out the bulb assembly.
3.
Disconnect
the
bulb base from the wiring harness by
lifting the plastic locking tab.
To
replace the bulb
assembly:
1.
2.
3.
Snap a new bulb into the wiring harness
(A).
Make
sure the locking tab
(B)
is over the lock
(C).
Install
the
bulb assembly by putting the small tab (D)
in
the
small notch in the retainer ring
(E).
Turn the bulb assembly
1/6
turn clockwise to lock it
in
place.
6-27