Filter
Top Products
To
Use the Cover:
Grasp the handle and pull the cover
over the rear storage area. Insert
the
ends
of
the support
rod into the slots in the trim panel near the liftgate.
When the cover isn’t in use, roll
it
back onto the roller.
Hold the handle and
lift
the support rod out
of
the slots.
Tug the cover lightly,
then
let it roll back automatically.
Don’t release the handle
until
the cover has rolled back
completely.
To
Remove
the
Cover:
You
can remove the cover and
roller assembly for extra cargo room. Slide back the end
sleeve and lift the assembly out
of
the notch in the trim
panel.
To
replace the assembly, reverse the procedure.
2-43