Filter
Top Products
B.
Remove the theft deterrent wheel
nut
by placing
the key end
of
the
wire
wheel wrench over the
nut
and turning
it
to
the left. Pull
off
the wire wheel
cover.
C.
Next, attach the wheel wrench to the
bolt
on
the
end
of
the jack. Raise the jack
a
little by rotating
the wheel wrench clockwise (to the right).
5.
Using
the wheel wrench, loosen all
the
wheel nuts.
Don't
renlove
them yet.
-
-'I
-,)yi
L:
A
6.
Position the
jack
under the vehicle nearest the tire to be
changed. The jack location should be approximately
five inches
(1
2.7
cm)
from the wheel well.
I
I
Getting under
a
vehicle when it is jacked
up
is
dangerous.
If
the vehicle slips
off
the
jack,
you
could
be badly injured or killed. Never get
under
a vehicle when it
is
supported
mly
by
a
jack.
5-29