Filter
Top Products
Only for cars with an air suspension front axle.
G
Disconnect the connection plug from the level sensor (12).
Undo the nut SW 10 mm (20) and release the control rod (18).
Undo the nut SW 10 mm (16) and remove the holder (14) with the level sensor (12).
Replace the level sensor fitted in the car with the level sensor supplied with the parts kit.
See the position of the threaded sleeve (see magnified view).
The installation work is to be completed using new lock nuts SW 10 mm (16 and 20), in reverse order.
Do not reconnect the connection plug yet.
2-8/EN