Using the phone in your vehicle
174
Under certain conditions, an SOS call is
triggered automatically immediately after a
severe accident. The automatic SOS call is
not affected by the SOS call button being
pressed.
Telephoning with the
car phone
If the BMW portable phone is not in the
cradle, you can telephone using the car
phone via the hands-free unit.
The telephone that can be used to set up a
connection is shown in the upper status
line in the Control Display.
The car phone must be enabled prior
to initial use. To do so, please consult
your BMW center.<
Calls can be set up or accepted using the
following equipment:
> Button in the steering wheel
> Control Display
Calls can only be set up via redi-
aling or missed calls.<
> Telephone keypad, folding
> Voice command system, only for out-
going calls.
Using the BMW portable
phone
1. Fold back the cradle slightly
2. Insert the portable phone.
Before starting off, place the BMW
portable phone in the cradle. You can
operate the portable phone using the
button in the steering wheel, the Control
Display, the telephone keypad or the voice
command system, but not if you are in the
middle of a call via the car phone.
If you are in the middle of a call using the
BMW portable phone, the connection will
be cut off as soon as you take it from the
cradle.<
Switching your BMW portable phone
on and off
You can switch your BMW portable
phone on and off by maintaining
extended pressure on the telephone
keypad.
Entering lock code
If, after switching on the BMW portable
phone, you are requested by a message
from the Control Display to enter the lock
code:
1. Enter the lock code, e.g. 1234
2. Press the button
Getting started
Making a call
1. Enter the desired phone number
2. Press the button
The phone number appears in the Control
Display's status line.
{Telephone on}.
1. {Dial number}
2. Enter the phone number
> Listen to the entered numerical
sequence:
{Read out}
> Delete the entire number:
{Delete}
3. {Dial}.
Online Edition for Part No. 01 41 0 157 197 - © 11/02 BMW AG