Driving
58
Stopping engine
Do not remove the remote control from
the ignition lock whilst the car is moving in
order to avoid the steering lock engaging during
steering.
Always take the remote control with you when
you leave the car. When parking on an incline,
apply the handbrake, otherwise the car could
roll away.<
Manual gearbox
1. With the car at a standstill, briefly press the
start/stop button.
2. Engage first gear or reverse.
3. Apply the handbrake.
Sequential Manual Gearbox SMG*
1. Apply the handbrake.
2. Engage a drive position.
3. Briefly press the start/stop button.
If N is engaged when the engine is switched
off, a visual and audible warning will be out-
put to indicate this.
Automatic transmission*
1. With the car at a standstill, move the selec-
tor lever to position P.
2. Briefly press the start/stop button.
Handbrake
The handbrake is primarily intended for pre-
venting a stationary car rolling away, and acts
on the rear wheels.
Indicator lamp
The indicator lamp lights up; a signal
will also sound when driving off. The
handbrake is applied.
Applying
The lever engages automatically.
Releasing
Raise slightly, press the knob and move the
lever down.
If exceptionally it is necessary to use the
handbrake while on the move, do not
apply it too firmly. Keep the knob on the lever
held in all the time. Too violent an application of
the handbrake could overbrake the rear wheels
and cause the rear of the car to skid.<
To prevent corrosion or an imbalance
between the brakes on the right and left
side, apply the handbrake lightly from time to
time when coasting to a standstill, provided that
it is safe to do so.
The brake lights do not come on when the
handbrake is applied.<
Manual gearbox
When shifting in 5th/6th gear, press the
gearshift lever to the right. Otherwise the
engine could be damaged if you inadvertently
shift into 3rd or 4th gear.<
Online Edition for Part-No. 01 41 0 159 725 © 09/05 BMW AG