Filter
Top Products
107
Entertainment OverviewControlsDriving hintsNavigationMobilityReference
3. Select "Independent mode " and press the
controller.
4. Select "Switch-on times " and press the
controller.
5. Move the controller to the left or right to
select "Timer 1" or "Timer 2".
6. Select the time and press the controller.
The first part of the setting is selected.
7. Turn the controller to make the adjustment.
8. Press the controller to adopt the setting.
The next part of the time setting is selected.
9. Complete the setting. Once the setting has
been completed, the time is memorised.
Activating the switch-on time
Move the controller to the left or right to select
"Timer 1" or "Timer 2", then press the control-
ler.
The switch-on time is activated.
The symbol on the automatic air conditioning
display lights up.
The symbol on the automatic air conditioning
display flashes to indicate that the system is on.
The system in question will only be
switched on within the next 24 hours. It
must then be reactivated.<
Remote control*
1 Switching on
2 Switching off
3 Activating the system
4 LED: comes on for approx. 5 seconds when
the system is activated
5 LED: flashes during switching on
6 Aerial
The average reception range is approx. 150 m,
approx. 500 ft.
You can optimise the reception range by
holding the remote control as high in the
air as possible with the aerial pointing upwards.
When switching on/off, do not touch the aerial
or point it at the car.<
Switching on/off
1. Press button 3 until the LED 4 comes on.
2. Press the required button within approx.
5seconds:
> To switch on, button 1
> To switch off, button 2
The LED 5 flashes rapidly for about 2 seconds
to confirm the switch-on/off request.
Online Edition for Part-No. 01 41 0 159 725 © 09/05 BMW AG