Filter
Top Products
24
Connecting System to Your PC
1. It is possible to copy map data, music or moving picture files into the built-in flash
memory inside the body or the SD/MMC memory card by connecting the system to a PC
via the USB cable.
It is not allowed to execute functions other than file copying and moving when the system is
connected to a PC via the USB cable; the button, the touch screen, the soft reset mode and the GPS
receiver become inoperable.
The system operates with the power from the USB port of the PC when the system is connected to the
PC. Therefore, the system shall be connected with the USB port where the power is normally
supplied. The system may not be capable of normal operation when connecting with the USB hub.
The battery is not recharged via the USB port
2. After booting the PC, connect the system to the PC using the USB cable as shown
below.
3. When the system is successfully connected to the PC, the screen displays as follows:
4. When the system is normally connected to the PC, you can see two ‘removable disk’
drives in the Windows Explorer window.
!
Note