AVERATEC 320 GPS GPS Receiver User Manual


 
5
Inserting SD/MMC Memory Card
Insert the SD/MMC memory card into the slot while paying attention to the orientation of the card
as shown below:
Exerting excessive force to insert into the slot in the wrong direction may damage the SD/MMC card or slot
Power Mode and Battery Recharging
Power Mode Conditions of Charged Battery
External Power Mode
Power is supplied to the system for operation from the AC/DC
adapter or the cigarette adapter/charger in your car.
[Power button ] lights red: The battery is being charged.
[Power button ] lights green: The battery is fully charged.
Battery-Powered Mode
Power is supplied to the system for operation from the battery.
[Power button ] lights red: The battery is being charged.
[Power button ] lights green: The battery is fully charged.
Power-Saving Mode
Pressing the Power button switches the system to the
power-saving mode. Pressing the power button again returns the
system to the operation mode.
Forced Power-Saving Mode
When the remainder power in the battery is 20-30% of its full
capacity, the warning window is displayed. In such a case,
immediately recharge the battery. If the battery is almost
discharged, it enters forced power-saving mode automatically.
Once it enters the forced saving mode, it cannot be turned on
again until the power is supplied by connecting the cigarette
adapter/charger or AD/DC adapter.
It takes three hours or longer to fully charge the battery from the forced power-saving mode, when using the
navigation function only in the preference conditions.
It is possible to operate the system with the fully charged battery for about two hours, when using the
navigation function only in the preference conditions.
Battery life will vary depending on usage.
!
Note
!
Note