P. 2 Installation Guide AS-1785
Table of Contents
Table of Contents.......................................................2
Introduction ................................................................2
Included in the Kit.......................................................2
Installation Points to Remember................................3
Harness Description...................................................4
Flashing the Hood Pin Switch..................................11
The Programming Assistance Button......................12
Programming a Transmitter.....................................12
Before you Proceed.................................................12
The Transmitter Programming Procedure...............13
Entering Programming Options Mode .....................13
Programming Options..............................................14
Tach Programming...................................................15
About Tach Programming........................................15
Multi-speed Tach Programming...............................15
Automatic Tach Programming .................................16
Horn Honk Timing....................................................16
Testing......................................................................17
Closing Up................................................................18
Supplementary Information......................................19
Fifth Relay Output (2
nd
IGN, ACC or CRANK).........19
Clutch bypass...........................................................19
Ignition-controlled Door Locks .................................21
Secure Lock.............................................................21
Standard Secure Lock .............................................21
Smart Secure Lock...................................................21
Lock Pulse Duration.................................................22
Engine Run Time.....................................................22
Starter Kill (Installation)............................................22
Passive or Active Arming.........................................22
Resetting the Remote Car Starter ...........................22
Events Logging........................................................23
Events playback.......................................................23
Start Failure Codes through the Parking Lights.......23
Diagnostics – Parking Light Flash Table.................24
Introduction
This Guide contains all the information relevant and necessary for the installation of the Remote
Car Starter. Most of the features of this product are explained in the User Guide. Therefore, if you
need detailed information about a feature of the product, we recommend that you refer to the User
Guide.
Included in the Kit
Please carefully read the Installation Guide before beginning the installation, especially the
Harness Description section and the Programming Options.
It is very important that you familiarize yourself with the programming and the operation of the
Remote Car Starter, even if you have already installed a similar Remote Car Starter in the past.
There are many innovative features that you may overlook if you do not read this Guide.
Prior to the installation, make sure that all the hardware components required to install the system
are in the box.
The following is a list of components included in the kit:
• 1 – Remote Car Starter Control Unit
• 1 – Monopole Receiver with incorporated LED
• 1 – Antenna Interconnect Cable
• 2 – multi-channel 5-button Remote Control
• 1 – six-pin 14 AWG Harness (Ignition Harness)
• 1 – five-pin 18 AWG Harness (Main Harness)
• 1 – twelve-pin 22 AWG Harness (Accessories Harness)
• 1 – two-pin 22 AWG Harness (Accessories Harness)
• 1 – parts bag: a Hood Pin-switch, a Connector and a Warning Label
• 1 – User Guide
The plug-in Valet button is not included with this model.
INDUSTRY CANADA USER NOTICE: