Filter
Top Products
NOTE: If the optional relays have been installed to control the vehicle
power door locks, the locks will automatically lock ten (10)
seconds after the PASSIVE arming cycle is completed. If
remote door lock/unlock is installed and automatic locking in
the passive mode is not desired, then the automatic door lock
in passive mode can be deleted by switching dip switch #3 in
the main unit to OFF. Consult your dealer.
2. MANUAL ARMING
1. If an optional passive/manual switch has been installed, then
move the switch to the OFF position while the vehicle ignition is ON.
2. Switch off ignition, leave vehicle, and close all protected openings.
3. Press the GREEN button on the transmitter.
4. The siren will chirp 1 time. Five (5) seconds later the RF-501 will
be
fully armed.
F. PASSIVE/MANUAL DISARMING OPERATION
Approach the vehicle and press the GREEN button. The siren will
chirp two (2) times and the lights will flash to indicate the RF-501 is
disarmed.
G. AUTOMATIC RE-ARMING (SELECTABLE)
The RF-501 is equipped with an automatic re-arming circuit that will
return the alarm to a fully armed state if a door is not opened within 60
seconds after disarming.
NOTE: If this feature is not desired, move dip switch #5 to OFF under
the access door on the RF-501 main unit.
H. DOMELIGHT SUPERVISION (OPTIONAL)