Filter
Top Products
RF-501 OPERATION INSTRUCTIONS
A. TRANSMITTER OPERATION
1. ARM/DISARM
TO ARM THE RF-501
Press the GREEN button once to arm. The siren will chirp one (1)
time, the lights will flash, and all doors will lock.
TO DISARM THE RF-501
Press the green button once to disarm. The siren will chirp two (2)
times, the lights will flash, and all doors will unlock. If optional dome
light supervision has been installed, all lighting normally connected to
the vehicle's pin switches will turn on for 60 seconds. If the key is
placed in the ignition and turned on before the 60 seconds has
expired,
the lights will go out.
NOTE: Your vehicle must be equipped with power door locks and the
optional relays installed with the RF-501 to allow alarm control over
the vehicle door locks. Additionally, all doors will lock automatically
each time the ignition key is turned on, and unlock automatically each
time the ignition key is turned off. Please see SECTION (L) "IGNITION
CONTROL POWER DOOR LOCK SAFETY SYSTEM".
2. PANIC FUNCTION
Press and hold the GREEN button for three (3) seconds, siren will
sound. Press the button again to stop the panic function.