Ultra Start 45xx Series Automobile Alarm User Manual


 
Page 6
1. Press and hold button #2 and the doors will unlock, continue holding
button #2, the trunk release will activate. The trunk release will be
confirmed by one park light flash and one siren chirp.
Note: The trunk release output will not activate when the ignition key
is in the “On” position.
1.Press and release button #1 on the remote transmitter.
2.The park lights will flash and the siren will chirp one time.
3.The doors will lock.
4.The LEDs on the antenna will start flashing within five seconds.
Note: If installed, the starter disable will activate.
* To Lock/Arm without chirps, press #1 and #2 at the same time.
1.Press and release button #2 on the remote transmitter.
2.The park lights will flash and the siren will chirp two times.
3.The doors will unlock.
4.The LEDs on the antenna will stop flashing.
Note: If installed, the starter disable will deactivate.
* To Unlock/Disarm without chirps, press #1 and #2 at the same time.
1. Press and release button #2 on the remote transmitter. The park
lights will flash, the siren will chirp two times and the drivers door
will unlock.
2. Press and release button #2 again and the remain doors will unlock.
Note: Button #2 must be pressed a second time within 3 seconds.
Lock Doors and Arm Alarm
Unlock Doors and Disarm Alarm
Priority Unlock Feature (Optional Feature)
Trunk Release
1
2
3
4
1
2
3
4
1
2
3
4
1
2
3
4
OWNER’S GUIDE 2way REMOTE STARTER/ ALARM