Filter
Top Products
Page 13
1) Press and hold buttons #1 and #4 until the minute portion of the
clock begins to flash.
2) To set the minute, press button #3 to increase and button #2 to
decrease the minute.
3) To set the hour, press button #1 and the hour portion of the clock
will begin to flash.
4) To set the hour, press button #3 to increase and button #2 to
decrease the hour. To set the AM/ PM icon, continue changing the
hour until the appropriate icon is displayed.
Note: The remote will exit clock adjust if there is no activity for 20
seconds.
Setting The Time (On equipped models only)
1
2
3
4
This feature allows the user to switch the remote sound or vibrations
features on or off.
The default setting on the system is audible sound confirmation (Beeps)
from the remote transmitter when a button is pressed on the remote
transmitter. To turn the “Beeps” off and have vibration confirmation,
press and hold buttons #3 and #4 on the remote transmitter for 5 seconds.
The vibration icon (See on left) will appear and the remote will vibrate
once as confirmation. To set the remote back to “Beeps” press and hold
buttons #3 and #4 for 5 seconds. The vibration icon will turn off and the
remote will beep as confirmation.
Silent Remote Operation (On equipped models only)
2WAY REMOTE STARTER/ ALARM
OWNER ’S GUIDE