Filter
Top Products
Page 10
KEY ICON- This icon will begin to flash when the remote starter button is
first pressed. After the vehicle has started this icon will stay on solid.
SIREN ICON- This icon indicates that the alarm has been triggered. The
remote will start to beep and the siren icon will come on solid at the same
time as the icon for the violated zone.
ANTENNA ICON- This icon will be visible or show a series of lines
next to the icon whenever the remote is within transmitting range of the
vehicle. The icon will disappear when out of transmitting range.
STATUS ICONS These icons display the current status of the system. The
icons may not all be present on the screen at all times, certain icons will only
turn on when a feature is activated.
STATUS CHECK MODE This feature is used to
check the status of the system. To check the status
press and release Button #4 on the remote
transmitter. The remote will display the icons of the
active features on the LCD screen.
TRUNK ICON- This icon will be displayed on the LCD screen when the
trunk release is activated by the remote transmitter. This icon will be
displayed until the system is armed or if the status button is pressed.
BATTERY ICON- This icon is always present when the LCD screen. This
icon will indicate the current battery level for the remote transmitter. The
black area of the icon will disappear as the battery level decreases.
RUN TIMER- This icon activates during remote starting. The bar graph will
count down in 2 minute increments, indicating how much time is left on the
remote starter’s runtime.
LCD DISPLAY
OWNER’S GUIDE 2way REMOTE STARTER/ ALARM