Filter
Top Products
2WAY REMOTE STARTER/ ALARM
OWNER ’S GUIDE
Page 3
Remote Start - Automatic Transmission
1. Press and release button #3.
2. The park lights will flash and the siren will chirp one time.
3. The vehicle will then remote start. The park lights will flash four
times then remain on while the vehicle is running. The run timer
on the LCD will begin to countdown.
4. The vehicle will continue to run for the programmed runtime*.
Note: If the remote starter fails to start, the park lights will flash a
Trouble Shooting Code. Count the number of flashes and
refer to the Diagnostics Chart on page 15.
Never remote start if the vehicle is parked in a Garage.
Operate in a well ventilated area only.
Remote Stop
1.Press and hold button #3 for three seconds. The remote starter
will shut down. The park lights will flash and the siren will chirp
two times to confirm shutdown.
Note: Pressing the brake pedal or opening the hood will also shut
down the remote starter.
Extended Run Time
1.Press and release button #3 while the vehicle is running.
2.The system will respond with one park light flash and one siren
chirp to confirm Extended Runtime.
The system will reset the run time*.
Note: Extended runtime will not work if the runtime is programmed
for 4 Minutes.
*Default 15 minutes
1
2
3
4
1
2
3
4
1
2
3
4